Ecumaster Battery Isolator is a motorsport master relay device designed for FIA compliant battery isolation and engine shutdown.
The device has built - in alternator load dump protection without the addition of any external components.
There is no risk of damage to expensive electronic equipment during emergency shutdown.
The isolator is controlled with two external switches and can be shut down with a CAN - bus message.
The message may be sent from an Ecumaster PMU16 unit in the case of impact or another event.
The device is configurable through CANbus.
It also sends diagnostic information which can be used by other equipment and is valuable during device setup and diagnosis.
It is fully protected against overheating and over current.
Device status is indicated with a multi - color led light.
Weight: 83g
Dimensions: 50mm x 100mm x 38.5mm
Voltage range: 6V – 19V,28V transient
(12V automotive installations only)
Operating temperature range: - 40C + 125C
Current capability: 300A continuous, peak up to 1000A
Current measurement resolution 4A
Current measurement range: - 1000A to 1000A
Current measurement accuracy: ±10%
Inductive load switching capability: 600mJ
Enclosure: Anodized aluminium, IP67 rated
High current terminals: M8 nickel plated terminals
or Radlok connectors
Signal connector: Deutsch ASX202 - 06PN
(mating plug ASX602 - 06SN included)
Power save state current consumption:
Product ID |
#20531 |
Manufacturer |
ECUMASTER
|
Guarantee |
12 months |
Stock |
On request |
Weight |
0.5 kg. |
Product code |
ECMBI |
Equivalent code |
- |
Compatible with cars
Universal product - compatible with all types of cars